1. Display interface: 10.4-inch color LCD touch screen, solvent resistant, parameter setting and analysis interface can be displayed in one interface, easy and fast operation.

2. Temperature range: 0-450 ℃, resolution of 0.1 ℃, measuring element PT100 (imported from Germany).

3. A lifting control device that can enhance self-locking - patented technology

4. The instrument is suitable for normal use in areas above 3650m altitude

4. Teflon specific connectors and locking sleeves - sealing and positioning

5. Unrestricted methods and data storage

6. Coated quartz orifice plate, heat-insulating and non explosive, unique orifice plate installation structure, no need to adjust the position when replacing orifice plates with different apertures.

7. Volume detection: Measurement range: 0-100mL, resolution: 0.1 mL.

8. Distillation rate: 2-10 mL/min (freely set, automatically adjusted), using fuzzy control algorithm to adapt to various samples, and the rate meets experimental requirements.

9. The condenser tube adopts Peltier temperature control technology without coolant; Temperature range: 0 ℃ to 80 ℃; Resolution: 0.1 ℃; Support for very sample program heating.

10. Output method: Embedded micro thermal printer.

11. Cooling method: Compressor cooling, maintenance free (imported Danvers brand). Refrigeration is achieved by quickly and automatically adjusting the evaporation rate of refrigerant through regulating valves.

12. Using quartz flask and quartz measuring cylinder.

13. Overall power: 1.6Kw

14. Operating environment temperature: 10-40 ℃.

15. Relative humidity: ≤ 80%

16. Capable of uploading analysis results to LIMS

1. Cold bath control: temperature range of 0-80 ℃, temperature control accuracy of 0.2 ℃. The heating rate of the cold bath can be controlled by segmented programs to ensure reliable condensation and outflow of light and heavy components during the distillation process. The cold bath adopts patented technology of integrated cold and hot conduction condenser, which enables fast and efficient cold and hot conduction of the instrument, without liquid conduction medium, and is safe and convenient.

2. Cold trap control: temperature range 0-60 ℃, temperature control accuracy 0.3 ℃, temperature inside the cold trap can be controlled by segmented program, fully enclosed independent space.

3. Pressure detection: measurement range of 300-1100hPa, accuracy of ± 3hPa, built-in pressure sensor. Automatically adjust the sample temperature value.

4. After the sample is completed, automatic flame testing ensures the safety of the laboratory; Before testing, support automatic total volume detection and automatic conversion to 100% volume.

5. Heating system: lightweight, low-voltage heating system; Fully automatic heater positioning system

6. Infrared radiation heating with a reflective cover greatly improves thermal efficiency, reduces thermal energy loss, and can save energy consumption by 40%. At the same time, it provides good thermal protection for various components below the furnace wire, extending its service life;

7. The heating furnace frame can be manually lifted to any position and can be manually slid down quickly and flexibly. When the experiment is over, the furnace frame automatically slides down, cutting off the residual heat of the heat source and achieving rapid cooling;

8. Electric furnace cooling, after the experiment is completed, the cooling fan rapidly cools down. Fully automatic lifting test chamber door

9. The built-in UV flame sensor automatically monitors and opens the protective air valve when a flame occurs, ensuring the safety of the experiment

10. The compressor, heating ceramic element, temperature sensor, cooling fan, and cooling diversion valve all use imported components to ensure the accuracy and reliability of instrument data, as well as long service life and low failure rate.

11. The connection of the distillation flask branch pipe and the installation of the temperature sensor both have patented technology fixed plugs, which are convenient and simple to use, with good sealing and consistent sensor positions.

12. Infrared modulation optical technology realizes liquid level tracking detection and initial distillation detection (imported from Panasonic), which is not affected by environmental interference and automatically detects the zero position of the volume.

13. Collection volume detection method: equipped with a high-precision continuous imaging volume detection system, volume detection range: 0-103.5 ml, testing accuracy of 0.01ml, fully automatic atmospheric pressure correction, custom fixed point volume automatic correction.

14. Recycling room: Peltier temperature control technology without coolant; Temperature range: 0 ℃ to 60 ℃, resolution: 0.1 ℃; Corrosion resistance; Automatically reduce VOC emissions.

15. After the laboratory is over, the status light indicates the safe temperature of the distillation flask to prevent accidental burns. The equipment automatically starts the active cooling function, using Peltier and high-power fans for dual cooling to shorten the waiting time for cooling in the next experiment

16. Fire extinguishing system: Built in automatic fire extinguishing system, using IR sensors for fire detection; Connecting CO2 or N2 at 4 bar to 6 bar can extinguish the fire on its own.

17. After the test is completed, a fully Chinese test report containing instrument model, instrument serial number, sensor serial number, test conditions, and result information will be automatically generated. The report can be viewed directly by the instrument, exported from a USB drive, printed directly, or connected to the LIMS system (without the need for external PC software)

18. Equipped with regular instrument calibration and calibration reminder functions to ensure that the instrument always operates at its best condition

19. Data storage: capable of storing no less than 4000 test results and equipped with advanced search and filtering functions for results